|
|
Torque Specifications
From Faq
Engine
- Throttle body mounting nuts/studs: 13 ft-lbs
- Spark plug: 14 ft-lbs (2RZ/3RZ), 13 ft-lbs (5VZ)
- Oil drain plug: 27 ft-lbs
- Engine mount to frame: 28 ft-lbs
- Engine mount to block: 38 ft-lbs (2RZ/3RZ), 32 ft-lbs (5VZ)
- Head bolts: 29 ft-lbs + additional 90° + another 90° <follow pattern> (2RZ/3RZ)
- Head bolts: 25 ft-lbs + additional 90° + another 90° <follow pattern>, recessed 13 ft-lbs (5VZ)
- Main bearing caps: 29 ft-lbs + additional 90°(2RZ/3RZ), 45 ft-lbs + additional 90° (5VZ)
- Exhaust manifold: 36 ft-lbs (2RZ/3RZ), 30 ft-lbs (5VZ)
- Intake manifold: 22 ft-lbs (2RZ/3RZ), 13 ft-lbs (5VZ)
- Air Intake Chamber: 15 ft-lbs (2RZ/3RZ), 13 ft-lbs (5VZ)
- Crankshaft pulley bolt: 193 ft-lbs (2RZ/3RZ), 217 ft-lbs (5VZ)
- Oil pan bolts: 9 ft-lbs
- Rear main oil seal: 9.7 ft-lbs
- Rear end plate: 14 ft-lbs
- Starter mounting bolts: 29 ft-lbs
- Pressure plate to flywheel: 14 ft-lbs
- Flywheel to crankshaft bolts: 65 ft-lbs (2RZ), 19 ft-lbs + additional 90° (3RZ), 63 ft-lbs (5VZ) ~USE LOCTITE~
- Flexplate to crankshaft bolts: 54 ft-lbs (2RZ/3RZ), 61 ft-lbs (5VZ)
Drivetrain
- Lug nuts: 83 ft-lbs
- Transmission bellhousing to engine: 53 ft-lbs
- Starter mounting bolts: 29 ft-lbs
- Transmission crossmember to frame: 48 ft-lbs
- Transmission mount to crossmember: 14 ft-lbs
- Transmission mount to transmission housing: 48 ft-lbs
- Transmission housing to transfer adapter: 27 ft-lbs
- Transmission housing to transfer case: 17 ft-lbs
- Shift lever retainer: 29 ft-lbs (2RZ/3RZ), 13 ft-lbs (5VZ)
- Transmission drain and fill plugs: 27 ft-lbs
- Transmission oil pan: 65 in-lbs (A340)
- Drain plug: 15 ft-lbs (A340)
- Companion flange nut to transfer output shaft: 87 ft-lbs
- Transfer front to rear case: 21 ft-lbs
- Driveshaft flange bolts: 54 ft-lbs
- Driveshaft center support bushing to frame: 27 ft-lbs
- Driveshaft center support bearing: 134 ft-lbs to set, then loosen, then 51 ft-lbs
Suspension/Steering
FRONT
- Brake caliper mounting bolts: 90 ft-lbs
- Brake caliper banjo bolt: 22 ft-lbs
- Steering knuckle to lower ball joint: 59 ft-lbs ~USE LOCTITE~
- Outer tie-rod to lower ball joint: 67 ft-lbs
- Lower control arm to frame (alignment cams): 96 ft-lbs
- Lower control arm to shock absorber: 101 ft-lbs (may vary with aftermarket equip)
- Lower control arm to swaybar end link: 51 ft-lbs
- Lower ball joint to lower control arm: 112 ft-lbs
- Upper ball joint to upper control arm: 80 ft-lbs
- Upper control arm to frame: 87 ft-lbs
- Shock absorber upper mount (3 bolts): 47 ft-lbs (may vary with aftermarket equip)
- Shock absorber center nut: 22 ft-lbs
- Swaybar to swaybar end link: 22 ft-lbs
- Swaybar brackets to frame: 19 ft-lbs
- Differential front mount to frame: 101 ft-lbs
- Differential rear mount to frame: 64 ft-lbs
- Ring gear bolts: 71 ft-lbs
- Differential drain plug: 48 ft-lbs
- Differential fill plug: 29 ft-lbs
- Axle shaft hub nut (ADD): 174 ft-lbs
- Free wheel hub inner lock nut (manual hubs): 203 ft-lbs
- Axle shaft inner hub safety bolt (manual hubs): 13 ft-lbs
- Hub body to axle hub (manual hubs): 23 ft-lbs
- Hub body cover (manual hubs): 7 ft-lbs
REAR
- Backing plate to axle housing: 50 ft-lbs
- Shock absorber to axle: 53 ft-lbs
- Shock absorber to frame: 53 ft-lbs
- Axle u-bolts: 90 ft-lbs
- Front leaf spring mount: 115 ft-lbs
- Shackle bolts (both): 67 ft-lbs (may vary with aftermarket equip)
- Leaf spring centering pin: 33 ft-lbs
- 3rd member to axle housing: 18 ft-lbs (with e-locker), 54 ft-lbs (w/o e-locker)
- Ring gear bolts: 71 ft-lbs (with e-locker), 92 ft-lbs (w/o e-locker)
- Carrier bearing caps: 83 ft-lbs (w/o e-locker)
- E-locker acutuator to 3rd member: 20 ft-lbs
- Differential drain & fill plugs: 36 ft-lbs
STEERING
- Steering wheel set nut: 26 ft-lbs
- Outer tie-rod to lower ball joint: 67 ft-lbs
- Inner tie-rod to rack: 76 ft-lbs
- Tie-rod end lock nut: 41 ft-lbs
- Steering rack mounting clamp: 123 ft-lbs
- Steering rack vertical center mounting bolt: 123 ft-lbs
- Steering rack horizontal mounting bolt: 141 ft-lbs
Miscellaneous
- Seat mounting bolts to body: 27 ft-lbs
- Seat belt: 30 ft-lbs (all mounting points)
- Body mounting bolts: 48 ft-lbs
Conversion Factors
- 1 ft-lb = 12 in-lb = 1.35582 Nm
|
|
