The DB kits can be returned to stock despite what we thought in years past. There are a couple of different ways to do this.
Parts: order the OE xmember section from the dealer for $$ or sawzall out the needed section from a wrecking yard (close to the frame) and follow directions in this thread: [[1]]
I would NOT recommend this procedure to a novice. If you don't have the skills and a solid confidence in said skills find an experienced fabber, welder or frame/body shop as they will be able to do the job.
You CANNOT just weld in the cut out section from the initial DB install!!! Attempting any other procedure than the above can/most likely will...result in serious problems...like your entire front end falling off on the hwy.
Part list if going all brand new:
[[2]]
- Part Number 90080-11373 Bolt, W/W Ordered 8 Amount $6.64
- Part Number 51202-04010 Crossmember Ordered 1 Amount $515.47
- Part Number 45209-34040 Yoke Sub Ordered 1 Amount $26.27
- Part Number 90080-11298 Bolt W/W Ordered 1 Amount $2.56
- Part Number 90080-10126 Bolt, Flat Ordered 1 Amount $3.29
- Part Number 90201-16033 Washer Ordered 1 Amount $3.60
- Part Number 90080-10098 Bolt Ordered 1 Amount $6.40
- Part Number 90179-16029 Nut Ordered 1 Amount $1.19
- Part Number 90080-11420 Bolt W/W Ordered 2 Amount $10.14
- Part Number 41654-0C010 Stopper Ordered 2 Amount $14.98
- Part Number 41653-35010 Stopper Ordered 2 Amount $25.92
- Part Number 90179-14063 Nut Ordered 2 Amount $2.60
- Part Number 90105-14090 Bolt Washer Ordered 5 Amount $8.20
- Part Number 90080-11180 Bolt W/W Ordered 1 Amount $0.66
- Part Number 90105-10385 Bolt Washer Ordered 4 Amount $5.84
- Part Number 94150-11001 Nut Ordered 4 Amount $2.84
- Part Number 90119-10933 Bolt W/W Ordered 8 Amount $8.00
Install, new:
[[3]]
Install, used:
[[4]]
[[5]]
[[6]]
[[7]]
[[8]]
[[9]]
