i was tightening it up and the bolt broke in half

that is the bolt im talking about,
any idea where to get another one?

ANy one have this bumper yet? also how does the wrap around addition work? is it bolt on, weld all one piece?

Its a sick bumper no matter

Front seal on my W56 giving up the ghost. Truck just turned 25 years old this month. Seal did good for 245K miles. Looking at pulling the trans the weekend after Thanksgiving (Dec5-6). Ordered all parts today.
Anyone have a trans jack I can borrow? Has anyone rented one? if so, from where? How much?
Don't want to spend the $80 at HF for one.

Recently installed a powertrax lock right in my 1987 22r 4wd pickup and did as precise job as the directions would allow. I made sure to mark everthing like it says and count turns on bearing adjusters. Got it all back together and checked the backlash felt great nearly exact to what it was before i tore it apart. Also the thrust washers seemed to be in great shape and showed no signs of scarring or wear. Now for my problem I reinstalled and now there quite a bit of slack in the drive line. the driveshaft can turn nearly a 1/4 turn before catching in the rear end thus causing when i drive it to windup between shift causing a big clunk and no matter how smooth you attempt to shift it still clunks? Now is this common with locker, should i tear it back down to check everything just trying to save myself some work.

I have a tacoma brush guard along w/ a 4Runner Brush Guard.

Both used on street trucks only, no damage.

They are both free.

Local pick-up.

or

Buyer pays Shipping.

Refrence 06040 for shipping.

Thanks-

Anyone know if this websites legit??
http://www.rocky-road.com/tacoma.html

Well, my 4Runner isn't really having any problems engine wise (unless it had it when i bought it and i'm just ignorant to the issue), but the previous owner paid a shop to replace the head gaskets but i was wondering if it would be worth it to take it to the toyota dealer and have them do it again?

It would be free covered by the recall.

edit: now googling it, i'm not finding the recall on my 4Runner.. maybe i jumped the gun posting this after only searching the forum. lol

Well, starting to get input and plan a party again this year. Molly and I are probably leaning towards December 5 (first saturday) and looking at Monroe's Lounge in Loveland again, since it has space, and Nate always treats us well. May be able to get some room deals, work on him some for some drink specials just for us more than likely. Leaning more towards get your own food if you want to eat sort of thing for those on a budget, or those that want to eat else where before the party. Or I'm discussing one possibility with Molly and Nate to keep things cheap for those on a budget and still have a little food.

Any input is welcome.:xbeer1:

Those of you with these coilovers how do you like them with no additional wieght?

I am going to be installing UCA's on I believe an 02 Tacoma and see they are a little different than the 05 I did being that it looks like the ball joint is pressed into the spindle and must be replaced by the misalignment spacer.

I was wondering if this is going to be a hard task or if I will be able to get it out with just a BFH.

Seems like an odd design to me.

Thanks for the help

Not my, but just a link.

$300
http://ocala.craigslist.org/pts/1470827778.html

Up for sale is a NEW front passenger side turn signal assembly for a 98-00 Taco. It's the one that goes into the front bumper. Comes complete with light bulb and socket! TYC Brand. I will post pics tonight.

Everything i have is off an 07 Tacoma

3" revtek spacer lift w/ Rear AAL (SOLD AAL)

Front and Rear TRD bilstein shocks $50

Rear bilstein 5100's SOLD

The lift was on the truck for 5k miles and TRD shocks were on for 7K miles

test..

One e-locker differential with 4.30 gears, pinion bearing makes noise. Motor included

As-is $325
with new bearing, seal, and crush sleeve $375
assembled with your gears and master install kit ( that you purchased)$400